Anker soundcore AeroClip 2 Review: Strong Calls, Balanced Sound and a High Price

The Anker soundcore AeroClip 2 gets the hardest part of open-ear earbuds right: calls remain clear when the world around you is loud. Its balanced sound and thoughtful app features make it a capable everyday pair, though the open design limits bass and PHP 9,995 is a substantial ask for clip-ons.

Calls are the main reason to consider it

Anker combines its Thus AI chip with four microphones and two bone-conduction sensors, designed to pick up the wearer’s voice amid surrounding noise. The company rates the system for environments reaching 80dB and above. In my test, my dad wore the earbuds beside a busy main road, with traffic and pedestrians nearby. I couldn’t hear an engine on the call, and his voice came through clearly, without words dropping out.

There’s also an external benchmark: Guinness World Records certified the AeroClip 2 in August 2026 for the highest speech quality score (G-MOS) among open-ear clip-on earbuds in an objective test. That result supports what I heard in practice. If you take calls in cars, cafés or open offices, this is the feature that makes the AeroClip 2 stand apart.

A familiar clip-on shape with practical details

The design follows the usual clip-on arrangement: a speaker sits toward the ear, a rear module holds the battery and controls, and a C-shaped bridge connects them. Anker calls the bridge GoldenFit and says it shaped it using more than 2,000 ear scans. The Anker soundcore AeroClip 2 comes in White, Black and Burgundy. Burgundy adds a welcome bit of color to a category that can look uniform.

A physical button on each rear module handles volume, playback and digital assistant controls. It’s easier to operate without nudging the earbuds out of position than a touch panel would be. The compact charging case is pocket-friendly, although its small size also makes it easier to misplace. At the back, USB-C sits beside a dedicated pairing button and a status light. The button makes pairing straightforward, and the earbuds carry an IP57 rating.

Comfort takes a little adjustment

Each earbud weighs 6.2g. Once I found the right position, I could wear them without much awareness of their weight. Getting that fit took some trial and error: shifting the clip up and down helped aim the speaker and ease pressure from the bridge.

Afterward, the earbuds stayed in place through turning, nodding and some energetic movement. I still checked the fit now and then, and they don’t lock into place like in-ear models. That’s part of the open-ear trade: nothing sits in the ear canal, which avoids the sealed feeling that can become tiring during longer listening sessions.

Open sound with sensible expectations

I tested with the EQ flat and HearID off to hear Anker’s default tuning. The 12mm dual-magnet driver delivers more low end than the open format might suggest, while keeping bass from overwhelming vocals. Treble has air and sparkle without turning sharp, and voices sound full enough for extended listening.

Still, open earbuds can’t match the deep, sealed bass of a good in-ear pair. The AeroClip 2’s low end is present, but restrained; tuning can’t change the limits of the design. At the volumes I used, sound leakage stayed minimal, including at maximum volume. That makes the earbuds easier to use around other people, while leaving you aware of traffic or someone calling your name.

Stable Bluetooth and a flexible app

Bluetooth is the only connection option, with LDAC available for higher-quality audio on compatible devices. In the soundcore app, a dedicated mode switches to LDAC, trading some connection stability for sound quality. In my range check, the connection held at about 10 meters. A concrete wall and a floor weakened it, but I could still listen on a rooftop with my phone one floor below. LDAC isn’t available on iPhone.

HearID 5.0 builds an EQ profile from a hearing test made up of A/B audio samples. The app also lets you remap single press, double press and a two-second hold; triple press is reserved for Nap Mode. Dual-device connection keeps two sources paired and hands playback to whichever one starts playing. That automatic switching worked as expected and was one of the features I’d miss on a single-device pair.

Other tools include a sleep timer in Nap Mode, Gaming Mode for reduced latency, left-right balance adjustment, Find Device with an escalating beep, 3D Spatial Audio for video and AI Translation across more than 100 languages.

Battery life and value

Anker rates battery life at up to eight hours per charge, or 32 hours with the case. At around 90% volume, I got about 6.5 hours of continuous playback. Higher volume helps explain the shorter result; it’s still enough for a workday and the journey home for many listeners. A 10-minute charge is rated to add about four hours, and the case recharges over USB-C.

The AeroClip 2 earned an 8.9 out of 10, with 9.0 ratings for design, comfort, connectivity, performance and software; battery and price scored 8.5 each. There’s no wear detection, and the price will be a sticking point. At PHP 9,995, it makes the most sense for people who regularly take calls in noisy places and want open-ear comfort without giving up enjoyable music playback. Its call performance is the clearest reason to pay the premium; its bass response is the trade-off to accept.